how to use bissell little green proheat

3 min read 16-01-2025

The Bissell Little Green ProHeat is a popular portable carpet cleaner loved for its ability to tackle tough stains and messes. But getting the most out of this powerful machine requires understanding how to use it effectively. This guide will walk you through the entire process, from preparation to maintenance, ensuring you achieve sparkling clean results.

Getting Started: Preparation is Key

Before you even plug in your Bissell Little Green ProHeat, take some time to prepare the area you'll be cleaning. This crucial step will save you time and effort in the long run.

1. Vacuum the Area

Thoroughly vacuum the area you intend to clean. This removes loose dirt and debris, preventing it from clogging the machine or getting redistributed during cleaning. The better the pre-vacuum, the better the results.

2. Pre-treat Stubborn Stains

For particularly stubborn stains, pre-treat them with Bissell's recommended stain remover or a solution of your choice (always test in an inconspicuous area first). Allow the pre-treatment to sit for a few minutes before cleaning. This extra step significantly improves stain removal.

3. Fill the Solution Tank

Locate the solution tank (usually clearly marked) and fill it with the appropriate cleaning solution. Bissell offers various solutions for different needs, so choose one that best fits your cleaning task. Always refer to the instruction manual for the correct solution-to-water ratio. Filling it incorrectly can lead to sub-optimal cleaning.

Using the Bissell Little Green ProHeat: Step-by-Step

Now that you're prepped, let's dive into the cleaning process itself.

1. Attach the Cleaning Tool

Choose the appropriate cleaning tool for your surface (usually a hand tool for upholstery and small areas). Ensure it’s securely attached to the machine. Check your manual if you’re unsure about attachment.

2. Test in an Inconspicuous Area

Before you start cleaning your entire carpet or upholstery, always test the machine and cleaning solution on a small, hidden area first. This will help you determine the solution’s effectiveness and ensure it doesn't damage the fabric or cause discoloration. It's a simple preventative measure worth doing.

3. Begin Cleaning

Slowly and methodically clean the surface, overlapping passes to avoid missed spots. Don't saturate the area; maintain a consistent, even application of the cleaning solution. Applying too much solution can lead to over-wetting.

4. Use the Spot Cleaning Brush

For concentrated stains, use the provided spot cleaning brush for more focused cleaning. Gently agitate the stain while applying the cleaning solution. This ensures the solution reaches deep within the fibers.

5. Rinse and Extract

Once you've cleaned the area, use the clean water tank (filled with fresh water) to rinse and extract the dirty solution. This step is critical to avoid residue buildup. Ensure the tank is correctly filled.

Drying and Maintenance

The final steps are just as important as the cleaning itself.

1. Allow Sufficient Drying Time

After cleaning, allow the area to air dry completely. Avoid walking on the area until it's completely dry, which could vary depending on the material and environmental conditions. You can use fans to speed up the drying process.

2. Empty and Clean the Tanks

After each use, empty both the dirty and clean water tanks. Rinse them thoroughly and allow them to air dry. This prevents mold and mildew growth.

3. Clean the Machine

Wipe down the exterior of the machine with a damp cloth. Store the machine in a cool, dry place, keeping the cleaning tools clean and organized. This basic maintenance prolongs the lifespan of your machine.

Troubleshooting Common Issues

Here are a few common problems and their solutions:

Machine Not Working: Check the power cord and ensure the power switch is on. Check the water levels in both tanks. If the problem persists, refer to the Bissell Little Green ProHeat manual or contact customer support.

Poor Cleaning Results: Try pre-treating stains, using a stronger cleaning solution, or making multiple passes over the area. You may need to increase the application time or use the spot cleaning brush.

Leaving Wet Spots: Ensure you're not over-saturating the area and that you're using the rinse and extraction feature correctly. Improper extraction is a common cause of this issue.

Conclusion

The Bissell Little Green ProHeat is a powerful and versatile cleaning machine. By following these steps and tips, you can effectively tackle a wide variety of cleaning challenges, leaving your carpets and upholstery fresh and clean. Remember to always consult your machine's instruction manual for specific details and safety precautions. Happy cleaning!