how to apply jergens self tanner

3 min read 03-02-2025

Want that perfect sun-kissed glow without the harmful UV rays? Jergens Natural Glow self-tanner is a popular choice for achieving a natural-looking tan. But getting a streak-free, even application takes a little know-how. This guide will walk you through the process step-by-step, ensuring you achieve a flawless, radiant tan every time.

Preparing Your Skin for Jergens Self Tanner Application

Before you even think about applying Jergens, proper preparation is key. This will help prevent streaks and ensure an even, long-lasting tan.

1. Exfoliate: The Foundation of a Flawless Tan

Start by exfoliating your entire body 24-48 hours before applying the self-tanner. This removes dead skin cells, creating a smooth surface for even color distribution. Use a gentle scrub, focusing on rough areas like elbows, knees, and ankles.

2. Shave or Wax (Before, Not After!)

Shaving or waxing should also be done 24-48 hours prior to self-tanning. Waiting allows your skin to recover and prevents the self-tanner from clinging to freshly opened pores, which can cause uneven discoloration.

3. Moisturize Strategically

Moisturize your skin, particularly dry areas like elbows, knees, ankles, and knuckles, the day before applying the self-tanner. However, avoid moisturizing on the day of application as this can interfere with the tanning process.

Applying Jergens Natural Glow Self Tanner: A Step-by-Step Guide

Now for the main event! Follow these steps meticulously for the best results.

1. Gather Your Supplies

You’ll need:

Jergens Natural Glow self-tanner (your chosen formula)
A pair of tanning mitts (highly recommended to prevent orange palms)
A mirror (for checking your work)
Moist wipes or baby wipes (for immediate cleanup of any mistakes)

2. Start with Small Amounts

Using a tanning mitt, squeeze a small amount of Jergens onto the mitt. Don't overdo it; you can always add more. It’s better to build the color gradually than to end up with a blotchy, uneven tan.

3. Apply in Long, Even Strokes

Work in sections, applying the self-tanner in long, sweeping motions. Blend thoroughly to ensure an even application. Pay extra attention to those drier areas mentioned before—blend extra well here to prevent blotches.

4. Don’t Forget the Often-Missed Spots!

Remember to apply self-tanner to your face, neck, and ears. Use a lighter touch on these more sensitive areas. For the face, you might consider a separate facial self-tanner designed for a more delicate complexion.

5. Blend, Blend, Blend!

This cannot be stressed enough! Thoroughly blend the self-tanner to avoid any streaks or patches. Pay particular attention to the hairline, ankles, wrists, and knees.

Aftercare: Maintaining Your Jergens Glow

Post-application care is just as important as the application itself.

1. Let it Dry Completely

Allow the self-tanner to dry completely before getting dressed. This can take 10-15 minutes depending on the product.

2. Avoid Water for a Few Hours

Refrain from showering or swimming for at least 4-6 hours after application to allow the tan to fully develop.

3. Moisturize Regularly

Moisturize daily to keep your skin hydrated and prolong the life of your tan. This helps prevent peeling and keeps your glow looking fresh.

4. Exfoliate Gradually

As your tan begins to fade, you can gently exfoliate to maintain an even fade. Avoid harsh scrubs to prevent stripping the tan too quickly.

Troubleshooting Common Jergens Self Tanner Problems

Streaks: This usually indicates uneven application. Make sure to blend thoroughly.
Orange Palms: Use tanning mitts to prevent this!
Patchiness: Exfoliate properly beforehand and ensure thorough blending.
Uneven Color: Start with less product, build gradually, and always blend well.

By following these steps, you can achieve a beautiful, natural-looking tan with Jergens Natural Glow self-tanner. Remember, practice makes perfect! With a little patience and attention to detail, you'll be rocking that sun-kissed glow in no time.