how to apply coco and eve self tanner

3 min read 12-01-2025

Coco & Eve's Sunny Honey Bali Self Tanning Foam is a popular choice for achieving a sun-kissed glow without the harmful effects of UV rays. But getting a flawless, streak-free tan requires the right technique. This guide will walk you through each step, ensuring you achieve the perfect, natural-looking tan.

Before You Begin: Prep Your Skin

Before applying any self-tanner, proper skin preparation is crucial. This ensures an even application and prevents patchy results.

1. Exfoliate: The Key to an Even Tan

Exfoliating removes dead skin cells, creating a smooth surface for even self-tanner absorption. Use a gentle scrub, focusing on rough areas like elbows, knees, and ankles. Avoid harsh scrubs that can irritate your skin. Do this at least 24 hours before applying your tanner.

2. Shave or Wax: Timing is Everything

Shaving or waxing should also be done 24 hours before applying your self-tanner. This allows your pores to close, preventing uneven color absorption.

3. Moisturize: Hydrate for a Smooth Application

Moisturize dry areas like elbows, knees, ankles, and wrists. This will prevent the self-tanner from clinging to these areas and creating darker patches. Avoid moisturizing your entire body as this can interfere with the tanner's absorption.

Applying Coco & Eve Sunny Honey Bali Self Tanning Foam

Now that your skin is prepped, let's apply the Coco & Eve self-tanner.

1. Gather Your Supplies

You'll need:

Coco & Eve Sunny Honey Bali Self Tanning Foam
A tanning mitt (essential for even application)
Moisturizer (for dry areas)

2. Start with a Small Amount

Dispense a small amount of foam onto your tanning mitt. It's better to apply multiple thin layers than one thick layer, which can lead to streaks and unevenness.

3. Apply in Circular Motions

Using long, sweeping motions with your tanning mitt, apply the foam to your skin. Start at your ankles and work your way upwards, ensuring complete coverage. Blend thoroughly at the joints (knees, elbows, ankles, wrists).

4. Don't Forget the Hard-to-Reach Places

Pay close attention to often-missed areas like your back, between your fingers and toes, and around your hairline. Use a smaller section of the mitt for these areas or consider asking for help.

5. Blend, Blend, Blend

The key to a streak-free tan is thorough blending. Take your time and ensure the self-tanner is evenly distributed across your entire body.

6. Wash Your Hands

Immediately after applying the self-tanner, wash your hands thoroughly with soap and water to prevent staining.

Aftercare: Maintaining Your Glow

Proper aftercare is as important as the application process itself.

1. Allow it to Dry

Let the self-tanner dry completely before getting dressed. This could take 30-60 minutes. Avoid touching your skin during this time.

2. Avoid Water

Avoid showering, swimming, or excessive sweating for at least 6-8 hours after application to allow the tanner to fully develop.

3. Moisturize Daily

Moisturize your skin daily to prolong the life of your tan. This keeps your skin hydrated and prevents the tan from fading too quickly.

4. Exfoliate Regularly

Gently exfoliate your skin every 2-3 days to prevent the tan from looking patchy as it fades.

Troubleshooting Common Problems

Streaks: This is often caused by uneven application or not blending properly. Ensure you’re using a tanning mitt and blending thoroughly.
Patchiness: This could be due to insufficient exfoliation or dry skin. Make sure you exfoliate well and moisturize dry areas before application.
Orange Tone: This can happen if you use too much product or don't blend adequately. Start with a smaller amount and blend more thoroughly.

By following these steps, you'll achieve a beautiful, natural-looking tan with Coco & Eve's Sunny Honey Bali Self Tanning Foam. Remember, practice makes perfect! Don't be discouraged if your first attempt isn't flawless. With a little patience and practice, you’ll master the art of self-tanning.